Industrial Plant
Plastic recycling plant with a capacity of 2 tons per hour consisting of 2 AMUT product inlet/washing lines each with a capacity of 1 ton per hour; 1 Bird Humboldt inside wastewater treatment plant consisting of 1 Kreyenborg stainless steel mixing tank, 660 gallon (2500 liter), 3 x 5 kw drives, on 4 legs; 1 Bird Humboldt stainless steel tank, 265 gallon (1000 liter) with pump; 1 Bird Humboldt decanter, type Censor 4.1-1, 316L stainless steel, 12 ton capacity per hour, max bowl speed 1900 rpm by a 108.5 kw main motor. Complete with casing, frame and backdrive. 1 AMUT drying unit consisting of dryer, blowers and cyclones. 1 Kreyenborg indoor silo installation consisting of 2 Kreyenborg mixing silos, stainless steel, 11,100 gallon (42,000 liter), 16.4 kw drive. 2 Kreyenborg mixing silos, stainless steel, 2650 gallon (10,000 liter), 26.9 kw drive. 1 Lammers filter duxt collector, stainless steel, 2 x 15 kw drive. 1 Kreyenborg big bag filling station for 1 ton bags. 5 Kreyenborg blowers,	$3,200,000.00
Note:

		Complete API manufacturing facility situated on approximately 100,000 sq ft plant with ancillary buildings, warehousing, storage and support facilities. Fully equipped. 15 reaction vessels equaling over 29,000 gallons of capacity. Dry mills, etc. For more information contact Anthony Tufano.	$0.00
Note:

		Thermotech 25TPH port soil remediation plant, model 1992 (27- 298). With dryer roaster, bag house, portable Thermotech afterburner, control house with Gencontrol III automatic burner, control system and Gencor TS100 semi-automatic burner control.	$205,000.00
Note:

		Phillips-Croftshaw solvent recovery system. Rated 10,000 cfm stream of contaminated air and recover 500 lbs/hour of solvents. (3) absorbers, (1) cooling tower, (1) 60' distillation column and (3) double lined stainless steel storage tanks: (1) 12,000 gallon and (2) 8,000 gallon, flat top and bottom. 200 hp steam boiler, etc. System installed in 1974.	$65,000.00
Note:

		Tide portable brick plant consisting of (1) main trailer with a dual brick making press, approx 8" x 15" x 6" high bricks, driven by a 75 hp, 4 cylinder Deutz diesel engine, with hydraulic reservoir pump; (1) incline belt feeder and control panels; (1) Scott turbulizer model HSB-2072, carbon steel, 12" x 12" top feed and end bottom discharge, driven by a 40 hp, 3/60/230/460 volt, 1180 rpm motor, base mounted; (2) inclined belt conveyors with feed hoppers; (1) incline conveyor and (1) 150 kva transformer.	$65,000.00
Note:

		Bulk incline outside conveyor, mild steel construction. Bulk galvanized mild steel storage bin with motorized discharge; potato destoning machine; Odenberg continuous drop down steam peeling system, stainless steel construction with infeed conveyors; stainless steel incline screw conveyor approximately 12' long with a 7' discharge height; 2 Van Mark continuous brush peelers with center drop discharge for potato peels, similar to Van Mark model 2600, all stainless steel sanitary construction, commonly used for peeling, washing or cleaning potatoes, vegetables or fruit products. Includes all interconnecting conveyors. Last running bulk potatoes at a food grade facility.	$130,000.00
Note:

		Complete potato chip processing line. Thin slice/crinkle cut chips, rated 700 kg/hour. All heavy duty construction fabricated in stainless steel. Line includes 5000 lt bulk oil tank, stainless steel potato receiver hopper, 6 mt feed conveyor, Berto destoner and vertical conveyor, Berto 8 roll peeler and auger, 2.6 mt inspection conveyor, stainless steel wash bath and conveyor, 2 Urschel CC slicers Berto wash bath, Berto rotary blancher, Berto 7 mt x 1.2 mt continuous fryer, Eriez vibratory inspection conveyor, cross bed salt hopper, 2 coating trommels, 2 seasoning hoppers, 2 stainless steel electric holding tanks, Berto gas fired oil tank, associated conveyors, pumps and waste systems, Ishida 16 station twin head weigh and release station, 2 Ishida metal detectors, Kawashima KBF-6200 twin vertical form fill and seal machine, conveyors, rotary packing tables, 2 Best Pack carton taping machines, electricals and ancillary equipment.	$1,400,000.00
Note:

		Farrell crackermill fine grinding system. Consisting of a main crackermill by Farrell with reduction gear, (2) 36" x 20" rollers complete with base. 1 fine grind Farrell crackermill, (2) 42" x 16" rollers 40% worn. (2) 24" x 29' conveyors, (2) 24" x 20'6" conveyors, (1) 29" x 23', (1) 18" x 12'6". 3 magnetic rolls; (1) 10" x 24", (1) 8" x 26", (1) 14" x 38". 2 Rotex shakers with screens, model 821 & model 52. One B & S shaker 30" x 48" with 1 hp, 203-230/460 volt, 1725 rpm, 60 hz, 3 phase motor. 3 screens 14", 3/8" and 40 mesh. 1 Falk coupler and motor frame. (1) 400 hp Westinghouse 583 rpm/460V 3137 drip, 3 ph, 60 hz rebuilt induction motor. 1 MCC relay package for Bradley control center. 1 Rockwell Allen Bradley motor control center. Siemens 800 amp, 600V, 500 hp disconnect. Hoffman box with 650 amp Allen Bradley soft start 480V. (2) EGS 50kva 480 volt transformers. 1 cyclone 80" tall, 36" wide, 10" OD inlet, 8" outlet with stand, 8'10" tubing, (2) 10" elbows. 5.5"W x 33"L blower,	$550,000.00
Note:

		Soybean crush facility, capacity to crush 2.5 million bushels of grain per year. Major items consist of: (3) Wenger model 10K UPC, 500 hp, universal pellet cookers with Allen Bradley variable speed drives; (3) Insta Pro model 2500, 125 hp extruders; (6) Anderson 55" Duo Expellers, 75 hp; Prater model GF8FS hammermill, 100 hp; Bliss insulated oven; Alfa Laval PX 30 separator, model TGD-116; Allen Bradley starters, controls, control panels and motor control center boxes. Contact us for complete equipment list.	$2,900,000.00
Note:

		Airex Corp regenerative thermal oxidizer. Converts hydrocarbons into carbon dioxide and water. Max capacities approx 3,500 scfm, 100 deg F, 182 pounds an hour, 95% heat recovery efficiency. Consists of 2 insulated chambers with heat exchange media, combustion chamber, burners, blower, gas train and some interconnecting pipe.	$25,000.00
Note:

		Vitamin E production facility. Production equipment includes: Stainless steel vertical tanks 5,300 and 8,000 gallon. 304 stainless steel vertical tanks, 4,000 and 8,000 gallon, dished heads, agitation off-center on bottom head, dimple jacketed; 1,110 and 800 gallon, horizontal, dished heads, on saddles. Lot of small Sparkler filters, stainless steel, vertical. Budzar heater. (2) 3,000 gallon Pfaudler glass lined reactors with SRW drive. Buss falling film evaporator, 304 stainless steel. Buss thin film evaporator, model KV-0400, 304 stain- less steel. (2) Buss wipe film short path evaporator, molecular still, model SAMVAC-0300 and -1200. Tanable helical filter, 36 liter cake/125 liter tank capacity, Hast C, model HF-10CF-10D. (2) Pfaulder WFE evaporators, 21.5m2/230 sq ft, 316 stainless steel, 25 psi/FV, 34,600 lbs, 1980. (2) Pfaudler columns, 316 stainless steel, 8' dia x 35'high Glitch BX packing, 14' tray, 2 sections, rated FV. Cleaver Brooks model CB boiler, 250 hp, 9,800,000,000 b	$2,200,000.00
Note:

		Waste water treatment plant rated 150,000 gpd consisting of the following: 20,000 gallon unload tank/pressure vessel; 30,000 gallon pre-holding tanks with bubblers, polymer mixer and tank; 1500 gallon sludge tank; inline static mixers of incoming unload lines; 2,000 gallon mixing tank, filter press and elevated stand with roll-off box on ground level; closed loop air control system; clarifier; all Schedule 80 PVC piping; 2 sand filters; 20,000 lb carbon treatment vessels (polishing unit); 10,000 poly batch discharge tanks. All equipment is electronically monitored from control room, is 440 volt and 3 phase. All controls are 4-20 mil amp. All programming is sized for this processing equipment, auto shut down for PH. This includes a complete lab that includes fume hood, flash tester, PH meters, Perkin- Elmer AA, slat top cabinet, acid safe, older GC, glassware, Heck testing kits, waste oil analyzer, flow meter, 24 hour sampler and much more. Discharge rate is set from the control room.	$360,000.00
Note:

Great Lakes Environmental 100 gpm capacity waste water treatment plant including Shriver 24" x 24" filter press plate clarifier, agitators, clarification tank, flocculation tank, PH adjustment tank, metal reuction tank, neutralization/disinfection tank, 3 stage polishing filters, 2 carbon filters, Galigher 2-1/2" sump pump, electrical controls. Skid mounted. Year 1992.

$105,000.00